- 130 Nm peak torque Enough headroom for a humanoid shoulder or elbow carrying a tool, a payload or the weight of an extended forearm.
- 150 rpm no-load output The 20:1 reduction gives the fastest output of the two mid-range modules, which shortens reach and reposition moves.
- 17-bit position feedback The encoder resolves 131,072 counts per output revolution and supports repeatability of 0.1° or better.
- Shortest body in its diameter class At 59 mm long it is the most axially compact of the 100 mm-class modules, which helps when two joints stack inside one shoulder.
- 1.2 kg at 113 Nm/kg Torque density keeps limb mass down, so the joints further up the chain work less to move the arm.
- 48 V across the whole range Every Xynova rotary actuator shares the same input voltage, so one limb can run from a single supply from hip to wrist.
Description
The PR20-102-130-HS is an integrated planetary joint module for the arm and torso axes of a humanoid robot — the joints that move constantly and still have to stop where the controller asked. It combines 130 Nm of peak torque, a 150 rpm no-load output and a 17-bit encoder in a 1.2 kg body measuring Ø102 × 59 mm.
The model code describes the hardware. 20 is the planetary gear ratio, 102 the housing diameter in millimetres and 130 the peak torque in newton-metres. The module runs from a 48 V bus, the same supply as every other rotary actuator in the range, and holds repeatability of 0.1° or better.
Against its closest relative, the PR21-100-140-HS, this is the quicker and more finely resolved of the pair. Both weigh 1.2 kg, but the PR20 turns at 150 rpm rather than 130, reads position on a 17-bit encoder rather than a 16-bit one, and packs into a 59 mm length rather than 61.7 mm. The PR21 answers with 10 Nm more peak torque. Choose this one when cycle time, feedback resolution or axial space decides the design.
Peak torque is the headline torque figure for the series. Rated continuous torque, rated current, the communication interface and the meaning of the HS suffix are confirmed with the quotation.
Key Capabilities
- 130 Nm peak torque: Enough headroom for a humanoid shoulder or elbow carrying a tool, a payload or the weight of an extended forearm.
- 150 rpm no-load output: The 20:1 reduction gives the fastest output of the two mid-range modules, which shortens reach and reposition moves.
- 17-bit position feedback: The encoder resolves 131,072 counts per output revolution and supports repeatability of 0.1° or better.
- Shortest body in its diameter class: At 59 mm long it is the most axially compact of the 100 mm-class modules, which helps when two joints stack inside one shoulder.
- 1.2 kg at 113 Nm/kg: Torque density keeps limb mass down, so the joints further up the chain work less to move the arm.
- 48 V across the whole range: Every Xynova rotary actuator shares the same input voltage, so one limb can run from a single supply from hip to wrist.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Type | Integrated planetary joint module |
|---|---|
| Model | PR20-102-130-HS |
| Peak torque | 130 Nm |
| No-load speed | 150 rpm |
| Gear ratio | 20:1 |
| Torque density | 113 Nm/kg |
| Weight | 1.2 kg |
| Size | Ø102 × 59 mm |
| Encoder resolution | 17-bit |
| Repeatability | ≤0.1° |
| Input voltage | 48 V DC |
| Rated continuous torque | Confirm at quote |
| Rated current | Confirm at quote |
| Communication interface | Confirm at quote |
| HS suffix definition | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
It is an integrated joint module for the mid-range axes of a robot limb or torso — shoulders, elbows, waist and neck rotation — where the joint has to move quickly and settle accurately.
Peak torque is 130 Nm and the no-load output speed is 150 rpm through a 20:1 planetary gearbox.
Both weigh 1.2 kg. This module is faster at 150 rpm against 130 rpm, carries a 17-bit encoder instead of 16-bit and is 59 mm long instead of 61.7 mm. The PR21 delivers 10 Nm more peak torque.
20 is the gear ratio, 102 the housing diameter in millimetres and 130 the peak torque in newton-metres. The meaning of the HS suffix is confirmed with the quotation.
It is offered by quotation — configuration, quantity and delivery are confirmed per project.
Yes. Tell us the models and quantities for the limb or robot and we will quote the set together.
Recently Viewed
You haven't viewed any products yet.
