- Same 60-frame drive, heavier housing Gear ratios, torque and speed tables, backlash and electrical ratings match the CRA-RI60-70's figures; the difference is mass, 1.03 kg against 0.73 kg for the base build.
- Four gear ratios 51:1 gives 42 N·m peak at up to 82 RPM, 81:1 gives 53 N·m at 51 RPM, and 101:1 and 121:1 both give 66 N·m at 41 and 32 RPM.
- 49 N·m allowable at average load At 101:1 and 121:1 the module is rated for 49 N·m at average load and 30 N·m at a 2000 RPM input speed.
- 300 W electrical platform All builds run from 24–48 V at 5 A rated and 6.7 A maximum continuous current, with a 0.096 N·m/A torque constant.
- Three fully specified builds 72.5 mm at 1.03 kg for the base unit, 91.5 mm at 1.2 kg for the extended -B body, and 72.5 mm at 1.04 kg for the -2E-EC.
- EtherCAT without added length The -2E-EC build keeps the 72.5 mm base length while adding a 16/18-bit encoder option and EtherCAT alongside CAN.
- Fourth build confirmed at quote The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
Description
The CRA-RI60-80 is the heavier-framed member of the Ti5 60-series: the same drive as the CRA-RI60-70 in a bigger housing. Base build mass is 1.03 kg against the 60-70's 0.73 kg, 1.2 kg against 0.88 kg for the extended body, and 1.04 kg against 0.76 kg for the EtherCAT-capable build.
Apart from mass the two frames share the same numbers. Gear ratios of 51, 81, 101 and 121 give 42, 53, 66 and 66 N·m peak torque at 82, 51, 41 and 32 RPM; allowable torque at average load runs from 32 N·m to 49 N·m; gear backlash is 20 arcsec on the two lower ratios and 10 arcsec on the two higher ones; and the platform is 300 W at 24–48 V with 5 A rated current, 6.7 A maximum continuous current, a 0.096 N·m/A torque constant and an 18 mm hollow shaft. Where the two differ beyond mass is marginal: this frame's extended body is 91.5 mm against 93 mm, and its EtherCAT build is 72.5 mm against 74 mm. The decision between the two is therefore mechanical fit and moving mass, and it is confirmed with the quotation.
Three builds are fully specified. The base CRA-RI60-80-PRO-2-XXX is 72.5 mm at 1.03 kg with a 16-bit encoder on CAN. The -B build extends to 91.5 mm at 1.2 kg with rotor inertia rising from 394.8 to 492 g·cm². The -2E-EC build stays at 72.5 mm and 1.04 kg and adds a 16/18-bit encoder option with EtherCAT alongside CAN. The -B-2E-EC designation completes the family, and its figures are confirmed with the quotation.
Like the rest of the line this is a joint for designers to build around — humanoid shoulders and elbows, collaborative arm axes, legged and multi-axis research rigs — where a joint is specified, serviced and replaced as one unit. Structure, controller, power and software are the integrator's.
Key Capabilities
- Same 60-frame drive, heavier housing: Gear ratios, torque and speed tables, backlash and electrical ratings match the CRA-RI60-70's figures; the difference is mass, 1.03 kg against 0.73 kg for the base build.
- Four gear ratios: 51:1 gives 42 N·m peak at up to 82 RPM, 81:1 gives 53 N·m at 51 RPM, and 101:1 and 121:1 both give 66 N·m at 41 and 32 RPM.
- 49 N·m allowable at average load: At 101:1 and 121:1 the module is rated for 49 N·m at average load and 30 N·m at a 2000 RPM input speed.
- 300 W electrical platform: All builds run from 24–48 V at 5 A rated and 6.7 A maximum continuous current, with a 0.096 N·m/A torque constant.
- Three fully specified builds: 72.5 mm at 1.03 kg for the base unit, 91.5 mm at 1.2 kg for the extended -B body, and 72.5 mm at 1.04 kg for the -2E-EC.
- EtherCAT without added length: The -2E-EC build keeps the 72.5 mm base length while adding a 16/18-bit encoder option and EtherCAT alongside CAN.
- Fourth build confirmed at quote: The -B-2E-EC designation combines the -B and -2E-EC suffixes, and its figures are confirmed with the quotation.
This model is offered on a quotation basis. Configuration, accessories, integration scope and delivery schedule all change the final figure, so pricing is confirmed per project rather than listed.
Buying through Robotix Market
This unit is sourced new through established distribution channels and ships worldwide with the manufacturer warranty. Technical support is coordinated with the manufacturer's own service network. Deployment scope, configuration, and commissioning responsibilities are agreed as part of the quotation — on-site installation is not included in the product price.
Features
Specs
| Brand | Ti5 Robotics |
|---|---|
| Model Family | CRA-RI60-80-PRO-2 |
| Product Type | Integrated rotary joint module (motor, gearing, encoder, drive) |
| Builds | -XXX (base), -XXX-B (extended body), -XXX-2E-EC (dual encoder, EtherCAT) |
| Further Build | -XXX-B-2E-EC — confirm at quote |
| Relation to the CRA-RI60-70 | Same ratios, torque, speed and electrical tables; heavier frame |
| Gear Ratios | 51:1, 81:1, 101:1, 121:1 |
| Peak Torque | 51:1 — 42; 81:1 — 53; 101:1 — 66; 121:1 — 66 N·m |
| Max Allowable Torque at Average Load | 51:1 — 32; 81:1 — 33; 101:1 — 49; 121:1 — 49 N·m |
| Rated Torque at 2000 RPM Input | 51:1 — 19.8; 81:1 — 27.5; 101:1 — 30; 121:1 — 30 N·m |
| Peak Speed | 51:1 — 82; 81:1 — 51; 101:1 — 41; 121:1 — 32 RPM |
| Rated Speed at Half Rated Torque | 51:1 — 68; 81:1 — 43; 101:1 — 34; 121:1 — 24 RPM |
| Gear Backlash | 51:1 — 20; 81:1 — 20; 101:1 — 10; 121:1 — 10 arcsec |
| Rated Power | 300 W |
| Supply Voltage | 24–48 V |
| Rated Current | 5 A |
| Max Continuous Current | 6.7 A |
| Torque Constant | 0.096 N·m/A |
| Encoder Resolution | 16-bit (base, -B); 16/18-bit option on -2E-EC |
| Communication Bus | CAN (base, -B); CAN or EtherCAT on -2E-EC |
| Hollow Shaft | 18 mm |
| Length | 72.5 ±0.5 mm base; 91.5 ±0.5 mm -B; 72.5 ±0.5 mm -2E-EC |
| Mass | 1.03 kg base; 1.2 kg -B; 1.04 kg -2E-EC |
| Rotor Inertia | 394.8 g·cm² base; 492 g·cm² -B; 479.96 g·cm² -2E-EC |
| Ingress Protection | Confirm at quote |
| Operating Temperature | Confirm at quote |
| Price | Quotation only |
Industries
Frequently Asked Questions
Mass and frame. The gear ratios, torque and speed tables, backlash, electrical ratings and 18 mm hollow shaft are the same on both; the 60-80 base build comes in at 1.03 kg against 0.73 kg for the 60-70. The extended and EtherCAT bodies are also a little shorter here, 91.5 mm and 72.5 mm against 93 mm and 74 mm. Their performance figures are identical, so the right frame is confirmed with the quotation.
Four: 51:1 at 42 N·m peak and up to 82 RPM, 81:1 at 53 N·m and 51 RPM, 101:1 at 66 N·m and 41 RPM, and 121:1 at the same 66 N·m at 32 RPM.
Gear backlash is 20 arcsec at 51:1 and 81:1 and 10 arcsec at 101:1 and 121:1.
The -2E-EC build, with CAN or EtherCAT and a 16/18-bit encoder option, in the same 72.5 mm length as the base unit. The base and -B builds use CAN with a 16-bit encoder.
With the quotation. Its length, mass, inertia and encoder figures are confirmed in writing for that build.
It is offered by quotation. Build, gear ratio, quantity and delivery are confirmed per project, and the price is set in the quotation.
Recently Viewed
You haven't viewed any products yet.
